GAUGE FOR TESTING CONTACT-MAKING OF LAMPS FITTED WITH CAPS E26, E26/50x39,E26/51x39 Page 1/1 & E26d (NON-SKIRTED)
目的：
PURPOSE:
检验灯在E26灯座中有关接触性能的尺寸。
To check lamp dimensions for contact-making in E26, E26/50x39, E26/51x39 or E26d lampholders.
检测：
TESTING:
如果灯插入量规时，W面可与V面共面或凸出V面，则可认为灯的形状与灯座的配合是合格的。
The shape of the lamp with regard to the fit in the lampholder is assumed to be correct, if the lamp can be pushed into the gauge until plane W reaches plane V or projects beyond it.
对于E26/E24灯头的灯，当V面与W面共面时，灯头端部（包括焊锡或导电材料）应不超过X面。
For E26/E24 capped lamps, when surfaces V and W are coincident, the top of the cap including any solder or conductive material, shall not extend above surface X.
整套E26灯头量规包含以下产品，如有需要请联系客服：
| 量规名称 | 型号 |
|
E26灯头通规 |
7006-27D-3 |
|
E26灯头接触性能规 |
7006-29-3 |
|
E26灯头止规 |
7006-29L-4 |
E26d灯头量规包括以下量规如有需要请联系客服：
| 量规名称 | 型号 |
| E26d/E26灯头通规 | 7006-27D-3 |
| E26d/E26灯头止规 | 7006-29L-4 |
| E26d/E26灯头接触性能规（分日规和美规） | 7006-29-3 |
| 检验成品灯上E26d灯头防意外接触性能规 | 7006-29A-2 |
|
E26d灯头用基准直径为23mm量规 |
7006-29B-2 |
|
E26d灯头用基准直径为13.2mm量规 |
7006-29C-2 |
|
E26d灯头用基准直径为10.4mm量规 |
7006-29D-1 |
TEL:0755-23702758
FAX:0755-23702756
24H服务电话：
13631576199